WGS-4215-8P2S Industrial 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C)

WGS-4215-8P2S

DESCRIPTION

Hardened 8-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Wall-mount Managed Switch (-40~75 degrees C)

INTRODUCTION

Designed to be installed in a wall enclosure mounted on a wall the WGS-4215-8P2S, an innovative, Industrial 8-port 10/100/1000T 802.3at PoE + 2-port 100/1000X SFP Wall-mounted Managed Switch, offers IPv6/IPv4 dual stack management, intelligent Layer 2 management functions, and user-friendly interface. The WGS-4215-8P2S is able to operate reliably, stably and quietly in any environment without affecting its performance. With a total power budget of up to 200 watts for different kinds of PoE applications and featuring ultra networking speed and operating temperature ranging from -40 to 75 degrees Cin a compact but rugged IP30 metal housing, the WGS-4215-8P2S is an ideal solution to meeting the demand for the following network applications:

  •  Building/Home automation network
  •  Internet of things (IoT)
  •  IP surveillance
  •  Wireless LAN

FEATURES

  • Complies with IEEE 802.3at Power over Ethernet Plus, end-span PSE
  • Backward compatible with IEEE 802.3af Power over Ethernet
  • Up to 8 ports of IEEE 802.3af/802.3at devices powered
  • Supports PoE power up to 36 watts for each PoE port
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100 meters
  • PoE management:
   Total PoE power budget control
   Per port PoE function enable/disable
   PoE port power feeding priority
   Per PoE port power limitation
   PD classification detection
   PD alive check
   PoE schedule

SPECIFICATIONS

Hardware Specifications

 

Copper Ports

Eight 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports

PoE Inject Port

Eight with 802.3at PoE+ injector function (Port-1 to Port-8)

SFP/mini-GBIC Slots

Two 100/1000BASE-X SFP interfaces, supporting 100/1000Mbps dual mode

Switch Architecture

Store-and-Forward

Switch Fabric

20Gbps/non-blocking

Switch Throughput@64 bytes

14.8Mpps @64 bytes

MAC Address Table

8K entries

Shared Data Buffer

4.1 megabits

Flow Control

IEEE 802.3x pause frame for full-duplex

Back pressure for half-duplex

Jumbo Frame

10KB

Reset Button

< 5 sec: System reboot

> 5 sec: Factory default

LED

 Power LED: Power (Green)

 PoE Port (Port-1 to Port-8):

PoE-in-Use (Orange)

LNK/ACT (Green)

 100/1000X SFP Ports (Port 9 to Port 10):

1000 LNK/ACT (Green)

100 LNK/ACT (Orange)

Connector

Removable 3-pin terminal block for power input

- Pin 1/2 for Power (Pin 1: V+/Pin 2: V-)

- Pin 3 for earth ground

DC power jack with 2.0mm central pole

Power Requirements

48~56V DC, 5A (max.) terminal block power input

48~56V DC, 5A (max.) DC jack power input

Note: The two power input interfaces don’t support power redundant function.

Power Consumption/ Dissipation

Max. 210 watts/716 BTU

Dimensions (W x D x H)

178 x 25 x 134 mm

Weight

640g

ESD Protection

Contact Discharge 6KV DC

Air Discharge 8KV DC

Enclosure

Metal

Installation

Fixed wall mount, magnetic wall mount or DIN rail

Power over Ethernet

 

PoE Standard

IEEE 802.3af/802.3at Power over Ethernet PSE

PoE Power Supply Type

End-span

PoE Power Output

IEEE 802.3af Standard

- Per port 48V~56V DC (depending on the power supply), max. 15.4

watts

IEEE 802.3at Standard

- Per port 50V~56V DC (depending on the power supply), max. 36 watts

Power Pin Assignment

1/2(+), 3/6(-)

PoE Power Budget

200 watts (depending on power input)

Max. Number of Class 2 PDs

8

Max. Number of Class 3 PDs

8

Max. Number of Class 4 PDs

7

Layer 2 Functions

 

Port Mirroring

TX/RX/Both

Many-to-1 monitor

VLAN

802.1Q tagged-based VLAN

Up to 256 VLAN groups, out of 4094 VLAN IDs

802.1ad Q-in-Q tunneling (VLAN stacking)

Voice VLAN

Protocol VLAN

Private VLAN (Protected port)

GVRP

Management VLAN

Link Aggregation

IEEE 802.3ad LACP and static trunk

Supports 1 groups with 2 SFP ports per trunk

Spanning Tree Protocol

IEEE 802.1D Spanning Tree Protocol (STP)

IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)

IEEE 802.1s Multiple Spanning Tree Protocol (MSTP)

STP BPDU guard, BPDU filtering and BPDU forwarding

IGMP Snooping

IPv4 IGMP (v2/v3) snooping

IGMP querier

Up to 256 multicast groups

MLD Snooping

IPv6 MLD (v1/v2) snooping, up to 256 multicast groups

Access Control List

IPv4/IPv6 IP-based ACL/MAC-based ACL

IPv4/IPv6 IP-based ACE/MAC-based ACE

QoS

8 mapping IDs to 8 level priority queues 

- Port Number 

- 802.1p priority

- DSCP/IP precedence of IPv4/IPv6 packets

Traffic classification based, strict priority and WRR

Ingress/Egress Rate Limit per port bandwidth control

Security

IEEE 802.1X port-based authentication

Built-in RADIUS client to cooperate with RADIUS server

RADIUS/TACACS+ authentication

IP-MAC port binding

MAC filtering

Static MAC address

DHCP snooping and DHCP Option82

STP BPDU guard, BPDU filtering and BPDU forwarding

DoS attack prevention

ARP inspection

IP source guard

Storm control support

Broadcast/Unknown unicast/Unknown multicast

Management Functions

 

Basic Management Interfaces

Web browser; Telnet; SNMP v1, v2c, v3

Firmware upgrade by HTTP/TFTP protocol through Ethernet network

Configuration upload/download through HTTP/TFTP

Remote/Local Syslog

System log

LLDP protocol

SNTP

PLANET Smart Discovery Utility

Secure Management Interfaces

SSH, SSL, SNMP v3

SNMP MIBs

RFC 1213 MIB-II

RFC 1215 Generic Traps

RFC 1493 Bridge MIB

RFC 2674 Bridge MIB Extensions

RFC 2737 Entity MIB (version 2)

RFC 2819 RMON (1, 2, 3, 9)

RFC 2863 Interface Group MIB

RFC 3635 Ethernet-like MIB

Standards Conformance

 

Regulatory Compliance

FCC Part 15 Class A, CE

Stability Testing

IEC 60068-2-32 (free fall)

IEC 60068-2-27 (shock)

IEC 60068-2-6 (vibration)

Standards Compliance

IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX/100BASE-FX

IEEE 802.3z Gigabit SX/LX

IEEE 802.3ab Gigabit 1000BASE-T

IEEE 802.3x Flow Control and Back Pressure

IEEE 802.3ad Port Trunk with LACP

IEEE 802.1D Spanning Tree Protocol

IEEE 802.1w Rapid Spanning Tree Protocol

IEEE 802.1s Multiple Spanning Tree Protocol

IEEE 802.1p Class of Service

IEEE 802.1Q VLAN Tagging

IEEE 802.1x Port Authentication Network Control

IEEE 802.1ab LLDP

RFC 768 UDP

RFC 793 TFTP

RFC 791 IP

RFC 792 ICMP

RFC 2068 HTTP

RFC 1112 IGMP v1

RFC 2236 IGMP v2

RFC 3376 IGMP v3

RFC 2710 MLD v1

RFC 3810 MLD v2

Environment

 

Operating

Temperature: -40 ~ 75 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Storage

Temperature: -40 ~ 85 degrees C

Relative Humidity: 5 ~ 95% (non-condensing)

Accessories

 

Standard Accessories

Quick Installation Guide x 1

3-pin Terminal Block Connector x 1

Wall-mounted Kit x 1

DIN-rail Kit x 1

Magnet Kit x 1

RJ45 Dust Cap x 8

SFP Dust Cap x 2

 

DOWNLOADS

Specification Sheet

User Manual 


Ask a Question



Related Items


Questions & Answers

Have a Question?

Be the first to ask a question about this.

Ask a Question
Sale

Unavailable

Sold Out